Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 17)

Trimble Ranger X Meter Reading System Software Installation
Figure 23: Field Applications successfully installed
10 Tap ok in the top right corner of the screen
Result: The software selection screen displays again.
11 Tap to select and install the last file labeled "2 Daylight Savings Fixer_WIn "
Figure 24: Installation in progress
Result: The last file installs. When the window closes, the system automatically reboots and returns to the start screen.
NOTE: N If the system does not reboot, restart the handheld prior to opening any software applications To restart,
press and hold the green power key The screen will show a countdown timer Continue holding the power
key until the countdown is completed The handheld will automatically restart
12 Tap Start> Programs> File Explorer> Badger File
Apps to access the software files as shown in
Figure 25
The software applications on the handheld are now
ready to use
13 Remove the memory stick from the handheld
Figure 25: Handheld Field Applications
INSTALLING THE METER READING SOFTWARE
Page 17 July 2013