Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 11)

Badger
®
ORION
®
Utility 1.0
January 2009
Page 10 of 28
Tamper Condition
If the Badger ORION water transmitter you are working with has a Tamper condition and
you perform the Read function, you will see this screen.
As shown above, enter the correct meter reading into the New field and perform the
Program function, in order to clear the tamper condition. If you perform the program
function and the tamper does not clear, the cable from the Badger ORION transmitter to
the register either has a short circuit or the wire is broken.