Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 7)

Badger
®
ORION
®
Utility 1.0
January 2009
Page 6 of 28
However, if there is a problem reading the unit, you may see a message like this.
Once the transmitter has been read, you can perform these functions:
• Stop the transmitter from sending meter readings until it receives a Start
command
• Start the transmitter sending meter readings
• Pause the transmitter so that, when consumption goes through the meter, the
transmitter begins sending meter readings again
• Program the transmitter to a different meter reading
• Read this ORION transmitter via radio
• Exit the tool