Avocent 280ES - Manual (Page 33)

Chapter 3: Basic Operations 27
Preemptive to have the OutLook allow any user to select any server at any
time; a request from another user disconnects the current user.
2. Click OK.
Setting up a Scan Pattern
In scan mode, the switch automatically scans from port to port (server to
server). Each user can scan the entire system sequentially or designate a
custom scan pattern by specifying servers and durations.
To access the Scan dialog box:
1. Press Print Screen. The Main dialog box will appear.
2 Click Setup in the Main dialog box. The Setup dialog box appears.
3. Click Scan in the Setup dialog box. The Scan dialog box appears.
Figure 3.5: Scan Dialog Box
To scan all servers in the system:
1. Click Defaults in the Scan dialog box.
2. In the Sec column, type the number of seconds (from 1 to 99) of desired
Delay Time before the scan moves to the next server in the sequence.
3. Move the cursor to the next line or press the Down Arrow and repeat step
2 for each server.
4. Click OK.
5. From the Commands menu, select Scan Enabled to start the scan mode.