Avocent 280ES - Manual (Page 37)

Chapter 3: Basic Operations 31
Passwords can be up to 12 characters long and are case sensitive. Legal
characters are: A-Z, a-z, 0-9 and (space).
3. In the Repeat box, type the password again and press Enter.
4. Click OK.
To password protect your user station:
1. Set your password as described in the previous procedure.
2. Select Enable Screen Saver.
3. Type the number of minutes for Delay Time (from 1 to 99) to delay
activation of password protection and the screen saver feature.
4. For Mode, select Energy if your monitor is EnergyStar compliant;
otherwise select Screen.
CAUTION: Monitor damage can result from the use of Energy Mode with monitors not
compliant with EnergyStar.
5. (Optional) Click Test to activate the screen saver test that lasts 10 seconds
then returns you to the Security dialog box.
6. Click OK.
To log in to your user station:
1. Press any key on the keyboard or move your mouse. The Password dialog
box appears. Type your password and then click OK.
2. Press Print Screen to start OSCAR.
To remove password protection from your user station:
1. From the Main dialog box, click Setup - Security. The Password dialog box
appears. Type your password and then click OK.
2. In the Security dialog box, single-click and press Enter or double-click in
the New box. Leave the box blank. Press Enter.
3. Single-click and press Enter or double-click in the Repeat box. Leave the
box blank. Press Enter.
4. Click OK.