FUTEK CSG110 (JM-2A / JM-2AD)-Series - Manual (Page 3)

- 3 -
Tel: (949) 465-0900
Fax: (949) 465-0905
Toll Free: (800) 23 FUTEK
Default Settings

Input Range: 0 to +/-2 mV/V

Excitation Voltage: 10 VDC

Output Range: +/-10 VDC, 4-20 mA
Connections
Pin Wiring Code
1 +Excitation (1)
2 +Signal
3 -Signal
4 -Excitation (1)
5 Ground
6 Ground
7 Ground
8 Ground
9 Ground
Pin Wiring Code Cable Color Code
9 Power Supply Red
8 Signal Out (Voltage) Green
7 Ground Orange
6 Ground Black
5 Ground N/A
4 Ground N/A
3 Ground N/A
2 Ground Blue
1 Signal Out (Current) (2) White
Note: Do not connect the device to the power supply when the power
supply is already on!
(1) For 6 wire sensors connect +Sense to +Excitation and –Sense to –Excitation or Ground
(2) Only available with current output option
Male- Power Side
Female- Sensor Side