MadgeTech RTDTemp2000 Data Logger - Manual (Page 10)

Page 9
MadgeTech RTDTemp2000
Section 4: Front Panel Overview
4.1 Changing the display units
The RTDTemp2000 comes with factory default display units of °C for the
external probe channel. These units can be easily changed by pressing the
F3 button in the main screen and then selecting F1 for external probe. After
selecting F1, the available units can be scrolled through by either pressing
the F1 key repeatedly or using the UP and DOWN keys.
Button pressing chain:
Main Screen -> F3 -> F1 ->F1 key repeatedly or UP and DOWN
4.2 Changing the number, type, and size of channels viewed
By default the RTDTemp2000 displays recently measured values from the
external probe channel on its Main Screen with the readings displayed in a
large size font. These recently measured values can, however, be hidden or
viewed on a smaller or larger scale.
To change the view of recently measured values:
From the Main Screen, press the F4 key to enter the Setup Menu and from
this menu press the F1 key to enter the Display screen. On this screen, func-
tion key 1 (F1) corresponds to the external probe. Pressing this function
key will cause the channel to scroll between “show” or “hide”. If “show” is
selected recently recorded values from the external probe will appear on the
main screen and if “hide” is displayed they will not.
Button pressing chain:
Main Screen -> F4 -> F1 -> F1
To change the size of displayed channels:
From the Main Screen, press the F4 key to enter the Setup Menu and from
this menu press the F1 key to enter the Display screen, then F4 to scroll to
the next screen. Here the F2 key will change the size of the channels viewed.
By pressing F2 repeatedly the size parameter will scroll between 3 sizes:
small, medium, and large:
Button pressing chain:
Main Screen -> F4 -> F1 -> F4 -> F2 repeatedly to scroll