MadgeTech RTDTemp2000 Data Logger - Manual (Page 24)

Page 23
MadgeTech RTDTemp2000
6.10 Unit Selection Menu:
Displays units currently being used for each channel
F1 = PROBE: selects external probe channel for unit change
F2 = no function
F3 = no function
F4 = OK: returns to Main Screen
Note: unit selection can be changed by pressing the corresponding function key
repeatedly or using the UP and DOWN arrows to select appropriate units.
CANCEL = returns to main menu without accepting changes
OK = accepts changes and returns to main menu
6.11 Device Configuration Menu:
Displays options available within the device configuration menu.
F1 = DISPLAY: enters Adjust Visibility screen
F2 = POWER: enters Power Modes screen
F3 = INFO: goes to Device Information screens
F4 = EXIT: returns to main screen
CANCEL = returns to main screen
OK = returns to main screen
UP = no function
DOWN = no function