Milestone XProtect Express 2014 - Manual (Page 53)

Milestone XProtect ® Express 2014 Administrator's Manual
www.milestonesys.com 53 Getting started
Cameras that do not support multiple simultaneous video streams cannot connect to the surveillance
server and the Management Application at the same time. Milestone recommends that you stop (see
"Start and stop services" on page 156) the Recording Server service when you configure such devices
for motion detection and PTZ. See also View video from cameras in Management Application (on
page 38).
You can configure motion detection settings for each camera, or for several cameras at once. Use the
list in the left pane of the wizard window to select cameras. To select several cameras at a time, press
CTRL or SHIFT while you select. When you select a camera, you see a preview from that camera. If
you select several cameras, you see a preview from the last camera you select. A green area in the
preview indicates motion.
Properties available in all XProtect software versions:
Name Description
Sensitivity
Adjust the Sensitivity slider so that irrelevant background noise is
filtered out, and only real motion is shown in green. Alternatively,
specify a value between 0 and 256 in the field next to the slider to
control the sensitivity setting.
The slider determines how much each pixel must change before it
is regarded as motion. With a high sensitivity, very little change in a
pixel is required before it is regarded as motion. The more you drag
the slider to the left, the more of the preview becomes green. This is
because with high sensitivity, even the slightest pixel change is
regarded as motion.
Motion
Adjust the Motion slider so that motion detection is only triggered
by the required level of motion. The selected motion level is
indicated by the black vertical line in the Level bar above the
sliders. The black vertical line serves as a threshold. When motion
is above (to the right of) the selected level, the bar changes color
from green to red, indicating a positive motion detection.
Alternatively, specify a value between 0 and 10000 in the field on
the left to control the motion setting.
The more you drag the slider to the left, the more positive motion
detections you see because less change will be needed to trigger a
positive motion detection. The number of positive motion detections
may also affect the amount of video you record, the amount of
notifications you receive and more.