Milestone XProtect Go 2014 - Manual (Page 75)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 75 Advanced configuration
because the properties in question are shared by all cameras rather than being specific to individual
cameras.
The term recording means saving video and, if applicable, audio from a camera in the camera's
database on the surveillance system server. Video/audio is often saved only when there is a reason to
do so, for example as long as motion is detected, when an event occurs and until another event
occurs, or within a certain period of time.
You can edit all properties on a white background. You cannot edit properties on a light blue
background. Note that you can also specify all of the Video Recording properties individually for each
camera (see "Recording" on page 92).
Name Description
Template
The template can help you configure similar properties quickly. Say
you have 20 cameras and you want to change the recording path,
archiving path, and retention time for all of them. Instead of having
to enter the same three pieces of information 20 times, you can
simply enter them once in the template, and then apply the template
to the 20 cameras with only two clicks.
Apply Template
Select which cameras you want to apply the template for. Use one
of the two Set buttons to actually apply the template.
Camera Name
The name as it appears in the Management Application as well as
in clients. You can overwrite the existing name with a new one.
Names must be unique, and must not contain any of these special
characters: < > & ' " \ / : * ? | [ ]