Milestone XProtect Go 2014 - Manual (Page 90)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 90 Advanced configuration
Start Event
Select required start event. The camera begins using the speedup
frame rates when the start event occurs.
Stop Event
Select required stop event. The camera returns to the normal frame
rates when the stop event occurs.
Properties available in XProtect Enterprise and XProtect Professional only:
Live Frame Rate
Required average frame rate for live video from the camera. Select
number of frames, then select the time unit interval (second, minute
or hour). The frame rate must be higher than the frame rate
specified under normal mode.
If the camera supports dual stream and dual stream is enabled, the
Live Frame Rate column will be read-only with the value Dual
streaming
—which cannot be altered.
Recording Frame Rate
Required average frame rate for recorded video from the camera.
Select number of frames, then select the time unit interval (second,
minute or hour). The frame rate must be higher than the frame rate
specified under normal mode.
Note: Speedup does not necessarily have to be based on motion- or events, you can also use
scheduling to configure speedup based on particular periods of time. If you prefer such time-based
speedup, you should still enable the use of speedup by selecting the Enable speedup check box.
Dual stream
Enable dedicated live stream
This additional stream feature lets you use the alternative stream of
the camera. It enables two independent streams to the recording
server
—a stream for live viewing and another stream for recording
purposes, with different resolution, encoding, and frame rate.
Stream
Select the type of the live stream. Stream settings for viewing live
video and for recording video may very well be different in order to
get the best result.
Resolution Select the resolution of the camera.
FPS Select the camera's live frame rate per second (FPS)
MPEG video format
With MPEG, you can define frame rate and other settings:
Frame rate
Properties available in all XProtect software versions:
Frame rate per second
Frame rate for viewing live and recorded video from the camera.
Select number of frames per second.
Properties available in XProtect Enterprise, XProtect Professional and XProtect Express only: