Milestone M50 - Manual (Page 101)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 101 Advanced configuration
Name Description
PTZ type
Your configuration options depend on the type of PTZ camera in
question:

Type 1 (stored on server): You define preset positions by
moving the camera using the controls (see "Move PTZ type
1 and 3 to required positions" on page 69) in the upper half
of the window, then storing each required position on the
Milestone Husky product server. You can define up to 260
preset positions this way.

Type 2 (imported from camera): You import preset positions
which have previously been defined and stored on the PTZ
camera itself through the camera's own configuration
interface. The number of allowed preset positions depends
on the PTZ camera and driver used.

Type 3 (stored on camera): You define preset positions by
moving the camera with the controls (see "Move PTZ type 1
and 3 to required positions" on page 69) in the upper half of
the window, then storing each required position in the
camera's own memory. You can define up to 260 preset
positions this way. If preset positions have already been
defined for the camera, you can simply import them for use
with Milestone Husky product.
Import / Refresh
Only available when you have selected PTZ type 2 or 3. Lets you
import already defined preset positions from the camera's memory
for use with Milestone Husky product. If you have already imported
preset positions this way, and preset positions have since then
been added or changed on the camera, you can use this button to
refresh the imported preset positions.
Add New
Only available when you have selected PTZ type 1. When you have
move the camera to a required position using the controls in the
upper half of the window, type a name for the position in the blank
field, then click the button to add the position to the list of defined
preset positions.
Remember that names of preset positions must contain only the
characters A-Z, a-z and the digits 0-9.
Set New Position
Only available when you have selected PTZ type 1 or 3. Lets you
change an already defined preset position. In the list, select the
preset position you want to change. Then move the camera to the
new required position using the controls in the upper half of the
window. Then click the button to overwrite the old position with the
new one.