Milestone M50 - Manual (Page 168)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 168 Advanced configuration
selected camera(s). The sub-features are listed in two columns in the lower part of the window: the left
column lists features related to live viewing, the right column lists features related to playback.
The Camera access settings check boxes work like a hierarchy of rights. If the Access check box is
cleared, everything else is cleared and disabled. If the Access check box is selected, but, for
example, the Live check box is cleared, everything under the Live check box is cleared and disabled.
Depending on the selected column, the following default features for live or playback from the selected
camera(s) give you the ability to:
Live Features
PTZ
Use navigation features for PTZ (Pan-tilt-zoom) cameras.
A user/group can only use this right if the user has access to one or
more PTZ cameras.
PTZ preset positions
Use navigation features for moving a PTZ camera to particular
preset positions. A user/group can only use this right if the
user/group has access to one or more PTZ cameras with defined
preset positions.
Manage PTZ presets Manage PTZ positions in XProtect Smart Client.
Output
Activate output (lights, sirens, door openers, etc.) related to the
selected camera(s).
Events
Use manually triggered events related to the selected camera(s).
This feature is available in XProtect Smart Client only.
Incoming audio
Listen to incoming audio from microphones related to the selected
camera(s). This feature is available in XProtect Smart Client only.
Manual recording
Manually start recording for a fixed time (defined (see "Manual
recording" on page 78) by the surveillance system administrator).
Outgoing audio
Talk to audiences through speakers related to the selected
camera(s). This feature is available in XProtect Smart Client only.
AVI/JPEG export
Export evidence as movie clips in AVI format and as still images in
JPEG format.
Database export
Export evidence in database format. This feature is available in
XProtect Smart Client only.
Sequences
Use the Sequences feature when playing back video from the
selected camera.
Smart search
Search for motion in one or more selected areas of images from the
selected camera. This feature is available in XProtect Smart Client
only.
Recorded audio
Listen to recorded audio from microphones related to the selected
camera(s).
You cannot select a feature, if the selected camera does not support the relevant feature. For
example, PTZ-related rights are only available if the relevant camera is a PTZ camera. Some features
depend on the user’s/group’s General Access (on page 167) properties.