Help – Audiovox 990 User Manual

Page 10

Advertising

IMPORTANT

AMOUNTINGKITISREQUIRED

FORTHISINSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATION
ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE

ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE

ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE1974

1974

Important-This radio cannot be installed in any U.S. made Chrysler, Dodge, or Plymouth vehicle without an
installation kit. Refer to the Kit Listing on Page 2 for the required kit. Complete kit installation is explained in the
instructions included with the kit.

1.RemoveExistingRadio:

A. Remove the existing dashboard trimpanel surrounding the radio opening. This panel is usually secured by

screws and/or snap-in clips.

B. Remove the two large screws used to secure radio to the sub-dashboard.
C. Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis.
D. Un-plug the wiring harness(es) and antenna cable and remove the radio.

2.InstalltheNewRadio:

A. Follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with

the kit.

B. Place the radio near the dashboard so the wires can be led through the opening and following the instructions

of Step 2 on Page 3, carefully wire the radio making certain all connections are secure and insulated and
confirm proper operation.

C. Install the radio/mounting plate assembly to the sub-dashboard according to instructions of installation kit.
D. Attach one end of the perforated support strap (supplied) to the screw stud on the radio using the hex nut

provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below
the radio using the screw and nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the

weight of the radio or improper operation of the radio due to vibration.

E. Replace the dashboard trimpanel.
F. Install knobs on radio shafts.

HEXNUT

PERFORATEDSTRAP

SCREWSTUD

RADIO

EXISTINGDASHTRIMPANEL

SCREW

SHAFTNUT

HEXNUT

MOUNTINGPLATEFROMKIT
(NOTINCLUDEDWITHRADIO)

1-800-645-7102

HELP!

Monday-Friday
Saturday

8:30am-7:00pmEastern
9:00am-5:00pmEastern

CHRYSLER-DODGE-PLYMOUTH

INSTALLATION

CHRYSLER-DODGE-PLYMOUTH

INSTALLATION

CHRYSLER-DODGE-PLYMOUTH

INSTALLATION

CHRYSLER-DODGE-PLYMOUTH

INSTALLATION

CHRYSLER-DODGE-PLYMOUTH

INSTALLATION

Advertising

Popular Brands

Popular manuals