Help – Audiovox 990 User Manual

Page 9

Advertising
background image

IMPORTANT

AMOUNTINGKITISREQUIRED

FORTHISINSTALLATION

8

8

8

8

8

FORD-LINCOLN-MERCURY INSTALLATION - 1985 AND NEWER

FORD-LINCOLN-MERCURY INSTALLATION - 1985 AND NEWER

FORD-LINCOLN-MERCURY INSTALLATION - 1985 AND NEWER

FORD-LINCOLN-MERCURY INSTALLATION - 1985 AND NEWER

FORD-LINCOLN-MERCURY INSTALLATION - 1985 AND NEWER

Important-This installation is designed for most 1985 through 1990 U.S. made Ford cars, and vans and an
installation kit is required for these vehicles. See Kit Listing on Page 2 of this manual or refer to the in-store application
chart. For 1991 and newer vehicles, the radio can be installed as shown on Page 3 of this manual or you can use
the AX-88-SNP kit. Instructions for use of the AS-88-SNP kit are included with the kit and are not shown in this
manual.

1.RemoveExistingRadio:

1.RemoveExistingRadio:

1.RemoveExistingRadio:

1.RemoveExistingRadio:

1.RemoveExistingRadio:

A. Remove existing dashboard trimpanel surrounding the radio opening. This panel is usually secured by

screws and/or snap-in clips.

B. Remove the screws used to secure radio to the sub-dashboard.
C. Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis.
D. Un-plug the wiring harness(es) and antenna cable and remove the radio.

2.InstalltheNewRadio:

2.InstalltheNewRadio:

2.InstalltheNewRadio:

2.InstalltheNewRadio:

2.InstalltheNewRadio:

A. Follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with

the kit.

B. Place the radio near the dashboard so the wire can be led through the opening and following the instructions

of Step 2 on Page 7, carefully wire the radio making certain all connections are secure and insulated and
confirm proper operation.

C. Install the radio/mounting plate assembly to the sub-dashboard according to instructions of installation kit.
D. Attach one end of the perforated support strap (supplied) to the screw stud on the radio using the hex nut

provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below
the radio using the screw and nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the

weight of the radio or improper operation of the radio due to vibration.

E. Replace the dashboard trimpanel.
F. Install knobs on radio shafts.

1-800-645-7102

HELP!

RADIO

HEXNUT

SCREWSTUD

PERFORATEDSTRAP

EXISTINGDASHTRIMPANEL

SHAFTNUTS

MOUNTINGPLATEFROMKIT
(NOTINCLUDEDWITHRADIO)

SCREW

HEXNUT

Monday-Friday
Saturday

8:30am-7:00pmEastern
9:00am-5:00pmEastern

FORD-LINCOLN-MERCURY

INSTALLATION

FORD-LINCOLN-MERCURY

INSTALLATION

FORD-LINCOLN-MERCURY

INSTALLATION

FORD-LINCOLN-MERCURY

INSTALLATION

FORD-LINCOLN-MERCURY

INSTALLATION

Advertising