Audiovox 990 - Manual (Page 16)

15 15 15 15 15
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
SETTINGTHECLOCK SETTINGTHECLOCK SETTINGTHECLOCK SETTINGTHECLOCK SETTINGTHECLOCK
1. With the vehicle ignition switch “on”, turn the unit off or insert a cassette into the tape door so
that the time is showing on the display panel.
2. Using a toothpick, pen point or similar thin object, press the Hour Adjust button
bs
to adjust the
hours to the correct setting.
3. Using a toothpick, pen point or similar thin object, press the Minute Adjust button
bt
to adjust
the minutes to the correct setting.
bq
EJECT BUTTON ( )
Tape playback is stopped and the cassette is
ejected by pressing this button, which also has
the function of switching over to radio operation.
NOTE: Never leave a cassette engaged in the
player when not in use. Doing so can
cause damage to the cassette and/or
mechanism. Always press the eject
button and remove the cassette when
leaving the vehicle.
br
DISPLAY CALL SELECTOR (CALL)
During radio operation, the station frequency
will be shown on the display panel. Pressing
this button will cause the time to be displayed for
5 seconds before returning to frequency read-
out.
During cassette operation, the time will always
be shown on the display panel.
bs
HOURADJUSTBUTTON(H)
This button is used to adjust the hours on the
built-in quartz clock. The button is recessed to
prevent accidental engagement so a toothpick,
pen point or similar object should be used to
activate it.
bt
MINUTE ADJUST BUTTON (M)
This button is used to adjust the minutes on the
built-in quartz clock. The button is recessed to
prevent accidental engagement so a toothpick,
pen point or similar object should be used to
activate it.