Setra System Model 470 - Manual (Page 9)

9
— — 45 $2D Shuts off the
function whose
command code follows it.
— CLEAR —C 45 67 $2D $43 Turn off MIN/MAX, clear 3.3
the tare value, convert to the
original engineering units.
—MIN/MAX —M 45 77 $2D $4D Exit MIN/MAX tracking mode. 4.5
—CONV —U 45 85 $2D $55 Reverts to reporting data in 4.2
the factory default pressure
units.
—ZERO —Z 45 90 $2D $5A Clear any values being 4.8
Zero/Tare’d from the
reported reading.
—PRINT —P 45 80 $2D $50 Turn off repetitive print mode. 4.9
BAUD RATE —5555S * * Change the baud rate. 5.2
DISABLE UNITS —2222S * * Disable engineering units 5.3
in nonvolatile memory.
REVISION —7777S * * Display revision level of 5.6
NUMBER firmware.
SELF- —8888S * * Execute internal diagnostics 5.5
DIAGNOSTICS routine.
STABILITY —1111S * * Change parameter for 5.8
display at stable pressure
indicator.
RAM SETUP RSA * * Change Hi and Lo ALARM 4.7
SETPOINTS setpoints in volatile memory.
RAM DISABLE R-2222S * * Disable engineering units 5.4
UNITS in volatile memory.
RAM USER RxUx * * Enter conversion ratio for 4.4
DEFINED UNITS non-standard engineering
units in volatile memory.