Timeguard EMU56 - Manual (Page 5)

4
Use the Hrs button to set the hours followed by the Mins
button to set the minutes to the actual clock time. Rapid
selection can be achieved by continuously holding down either
the Hrs or Mins buttons.
If the Set button is now pressed briefly and then released, the
display will return to the correct time of day with the colon
flashing. The module is now in its operating condition and will
switch "ON" and "OFF" according to the programmes set. To
alter the clock setting subsequently there is no need to clear the
memory first.
NB: Pauses of 15 seconds or more during clock setting will
result in automatic return to the operating condition.
Important: After setting a clock time which falls within a
programmed "ON" period, the unit will not switch "ON". An
"ON" time only (leaving the "OFF" time blank i.e. ––:––) can be
programmed for just after the current clock time on the current
day and the unit will turn "ON" when the clock time equals