Timeguard EMU56 - Manual (Page 8)

7
Setting Programmes – Day 2, 3 etc.
If the display still shows a day 1 "ON" or "OFF" programme
press the Day button, and the day indicator will move above
day 2. If, instead, the display shows the clock time with the
colon flashing press the Set button and hold down for about 3
seconds until the display shows the first programme "ON"
time for day 1. Press the Day button again briefly and the day
indicator will move above day 2. In either case the display will
change to with a flashing 1 (indicating
programme 1 on day 2) appearing underneath the "ON"
indicator.
ON
INT INT
ON C