Timeguard EMU56 - Manual (Page 6)

5
the programmed "ON" time and behave to programme
subsequently. There is no need to remove this "ON"
programme after start up.
Planning the Programmes
Aprogramme is a pair of ON/OFF settings, which will dictate
when the appliance will switch "ON" and "OFF". Programmes
can be set before or after setting the clock time. Programmes can
be carried over midnight by programming the required "ON"
time and then an "OFF" at 0:00 for the first day, followed by an
"ON" at 0:00 and the required "OFF" time for the second day.
Setting Programme 1
Press the Set button and hold it down for about 3 seconds until
the display shows with a flashing "1" (indicating
programme 1) appearing underneath the "ON" indicator and
the day indicator will point to day 1. To programme the first
ON/OFF times for day 1 set the "ON" time required by
ON
INT INT
ON C