Timeguard SLW360 - Manual (Page 4)

3
Parts included
• PIR Sensor unit.
• Instruction manual. Please keep safe for future
reference.
• Accessory Pack. Includes 2 x wall plugs, 2 x wall
fixing screws, 1 x lens mask sticker.
• 1 x outdoor mounting sealing gasket.
• 1 x incoming/outgoing wire gasket.
Tools and parts needed
• 3 core flexible cable.
• Electric/hand-held drill & bits.
• Terminal or Electricians screwdriver.
• Large slotted/philips screwdriver.
• Wire cutters suitable mains interconnect cable.
This product is suitable for indoor or outdoor use.
Connected load must not exceed maximum
2000W filament/incandescent or 500W fluorescent/low
energy lighting.
Do not attempt to install during wet weather, if you are
suffering from nausea or dizzy spells or on medication
with similar side effects. If in any doubt, consult a
qualified electrician.
Not suitable for use with discharge lighting.
Selecting a location
The motion detector has a number of detection zones,
at various vertical and horizontal angles as shown (see
diagram A).
A moving human body needs to cross/enter one of
these zones to activate the sensor. The best all-round
coverage is achieved with the unit mounted at the
optimum height of 2.5m.
Careful positioning of the sensor will be required to
ensure optimum performance. See diagram A detailing
detection range and direction.
SLW360_Instruct_art_2.1.qxd 3/5/06 9:28 am Page 3