Trio Motion Technology Uniplay HMI - Manual (Page 7)

7
Quick Start Guides
symbol alongside the action type. A further
menu level then allows you to set the action such
as “Go to page”, “Set variable” or even “Execute
command” which will execute a line of BASIC.
The BASIC line can include colon “:” separators to
allow some multi-line sequences to be executed.
USING CHINESE FONTS WITH
UNIPLAY
The UNIPLAY panel runs Win CE and has
Microsoft JhengHei font installed both in standard
and bold thickness. These fonts should also be
selected in MPv3 so that they can be correctly
rendered on both the UNIPLAY HMI and the PC.
If other fonts are selected they may render in
the editor on the PC but will not appear on the
UNIPLAY .
SOFTWARE INSTALLATION
The UNIPLAY HMI device software runs on the
Windows CE operating system installed on the
panel. No additional software installation is
required to use the UNIPLAY HMI system.
Installation of any additional software on the
device by users will invalidate the warranty.
INSTALLATION ENVIRONMENT
The UNIPLAY is designed for industrial use.
The temperature operating range is 0 to 50°C It
may not be suitable for using in certain outdoor
applications.
NEMA I/P Rating
The UNIPLAY front bezel is NEMA 4/IP65 rated.
When installed properly in a NEMA 4/IP64
panel, the NEMA 4 rating of the panel will not
be compromised. This means that fluids will not
enter the panel during wash downs.
Electrical Environment
The UNIPLAY 7 / 10 has been tested to conform
to European CE requirements. This means that
the circuitry is designed to resist the effects of
electrical noise. This does not guarantee noise
immunity in severe cases. Correct wire routing
and grounding will insure proper operation.
Mechanical Environment
Avoid installing units in environments where
severe mechanical vibration or shocks are
present.