Ai edit recording – Aiwa LCX-357 User Manual

Page 14

Advertising
background image

14

ENGLISH

AI EDIT RECORDING

f

,

g

s

2

3

4

5

1

2

FUNCTION

f

,

g

s

The AI edit function enables CD recording without worrying about
tape length and track length. When a CD is inserted, the unit
automatically calculates track lengths. If necessary, the order of
tracks is rearranged so that no track is cut short.
(AI: Artificial Intelligence)

NOTE

AI edit recording will not start from a point halfway into the tape.
The tape must be recorded from the beginning of either side.

1 Insert the tape into the deck.

Insert the tape with the side to be recorded on first facing out
from the unit.

2 Press CD, and load the disc.

You can press FUNCTION on the remote control repeatedly
to select the CD function.

3 Press MODE three times.

4 Press the numbered buttons to designate the tape

length.

10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press 6 and 0.
In a few seconds, the microcomputer determines the tracks
to be recorded on each side of the tape.

f

and

g

are also available to designate the tape length.

5 Press

w

to start recording.

The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front (side A) ends, recording
on the back (side B) starts.

To stop recording

Press

s

. Recording and CD play stop simultaneously.

To clear the edit program

Press

s

twice.

To check the order of the programmed track numbers

Before recording, press MODE to select side A or B, and press

g

repeatedly.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than
the specified recording time printed on the label. This unit can
program tracks to use the extra time.

NOTE

• Recording is prohibited if the erasure prevention tab on either

side of the tape is broken off.

• The AI edit function cannot be used with discs containing 31

tracks or more.

Tape length

Tape side A
(front side)

Remaining
time of side A

Selected tracks
for side A

Number of programmed tracks

Program number

Track number

Advertising