Aiwa LCX-357 - Manual (Page 4)

4
ENGLISH
2
1
3
PREPARATIONS
2 Connect the supplied antennas.
Connect the FM antenna to the FM 75
Ω
terminals and the
AM loop antenna to the AM LOOP terminals.
3 Connect the AC cord to an AC outlet.
The clock will flash on the display when the AC cord is plugged
into an AC outlet for the first time after purchase.
For setting the clock, see page 6.
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Finally, connect the AC cord.
• There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
1 Connect the speaker cords to the main unit.
The cords with the white stripes should be connected to the
0 terminals and the other cords to the 9 terminals.
AM loop antenna
FM antenna
Right speaker Left speaker
AC cord
Speaker
cord
to an AC outlet
AM loop antenna
FM antenna