Sleep timer – Aiwa LCX-357 User Manual

Page 17

Advertising
background image

En

ENGLISH

17

TIMER

NOTE

• Timer playback and timer recording will not begin unless the

power is turned off.

• If you use the unit while the timer is set, repeat steps 6 to 8 to

prepare the source (and the recording destination), and adjust
the volume and tone before turning off the power.

To check the timer setting

Press TIMER/SLEEP repeatedly so that “TM PLAY” or “TM REC”
flashes. After 4 seconds, the timer-on time, the source and the
duration for the timer-activated period are displayed for 4 seconds.

To change the timer setting

Set the timer again from the beginning.

To cancel timer standby mode temporarily

Press TIMER/SLEEP repeatedly so that “TM OFF” is displayed.

5

(and

4

) disappear on the display.

SLEEP TIMER

f

,

g

a

1

2

3

The unit can be turned off automatically at a specified time.

1 Press TIMER/SLEEP so that “SLEEP” appears on

the display.

2 Within 4 seconds, press

a

.

3 Within 4 seconds, press

f

or

g

to specify

the time until the power is off.

Each time the button is pressed, the time changes between 5
to 240 minutes in minute steps.

To check the time remaining before the power is turned
off

Press TIMER/SLEEP.
The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press TIMER/SLEEP so that “SLEEP” appears on the display,
and within 4 seconds, press

s

.

Specified time

Advertising