AT&T 9002 - Manual (Page 15)

13
Headset Jack
You can use this telephone hands-free when you install an optional headset
and use the belt clip provided.
1 Attach the belt clip (see “Belt Clip” in the INSTALLATION section of
this manual).
2 Plug the headset (purchased separately) into the jack located on
the right side of the handset. (For best results, use only an accessory
headset with 2.5 mm plug.) Do not force the connection, but make
sure the plug fits securely.
3 Follow instructions under “Making a Call” or “Answering a Call.”
NOTE: The earpiece and microphone on the handset are disabled when the
headset is plugged in.
OPERATION
9002_book.1AT&T 8/12/98, 4:09 PM 13