Auerswald 1500 - Manual (Page 16)

Commissioning
16
2. Guide the cable to the outside through one of the cable channels (see
Fig. 5 ).
3. Turn the telephone around again.
4. Insert the other ISDN cable into an ISDN wall jack connected to the PBX.
5. If required, insert the wall-mounted COMfortel XT-PS power supply (type
number 809) into a freely-accessible 230 V mains socket.
1
For a short moment, the Auerswald logo and then the language
menu are shown on the display.
6. Press the softkey next to the required language.
L You can use the softkeys (keys next to the display) in any list to
browse to the required option.
1
The MSN entry menu is shown on the display.
7. Use the keypad to enter the internal telephone number previously config-
ured in the PBX.
L Use the softkey (key next to the display) to delete the numbers one at a
time from the right.
8. Press the softkey to complete the entry.
1
The date and time as well as the name of the internal subscriber
are shown on the display. The telephone is now ready for use.
Note: If the date and time are not yet configured in the PBX, only the name
and version of the telephone are shown on the display.
Further steps
ġ
Configure the telephone according to your individual needs. You can per-
form the configuration not only using the menu on the display (see the User
Fig. 5: Connecting to the PBX
☞