Brother MFC-5890CN - Manual (Page 45)

General setup
29
3
Secure Paper Feed mode for
Ledger size Short Grain Paper
3
If your printed pages have smudge problems
when using Ledger paper, your paper may be
short grain paper. Choose
LGR - Short Grain and set it to On to
avoid this problem.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
LGR - Short Grain.
d
Press d or c to choose On.
Press OK.
e
Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or paper manufacturer for
paper specifications.
• Printing will be slower when using the
LGR - Short Grain setting.
Volume Settings
3
Ring Volume
3
You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press
d
or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.You can also change the volume
through the menu, by following the
instructions below:
Setting the Ring Volume from the
menu
3
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
e
Press d or c to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.