Brother MFC-5890CN - Manual (Page 56)

40
5
Entering Fax mode
5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in blue.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„ Fax Resolution (See page 45.)
„ Contrast (See page 44.)
„ Glass ScanSize
(MFC-5890CN: See page 41.)
(MFC-6490CW: See page 42.)
„ Phone Book (See page 79.)
„ Outgoing Call (See page 81.)
„ Caller ID hist. (See page 81.)
„ Broadcasting (See page 43.)
„ Delayed Fax (See page 46.)
„ Batch TX (See page 46.)
„ Real Time TX (See page 45.)
„ Polled TX (See page 92.)
„ Polling RX (See page 91.)
„ Overseas Mode (See page 46.)
„ Set New Default (See page 47.)
„ Factory Reset (See page 47.)
When the option you want is highlighted,
press OK.
Faxing from the ADF
5
a
Press (Fax).
b
Place the document face up in the ADF.
(See Using the ADF on page 22.)
c
Enter the fax number using the dial pad,
One Touch or Speed Dial or Search.
(For details, see How to Dial
on page 79.)
Note
You can preview a fax message before
sending it by pressing Fax Preview.
For details, see How to preview an
outgoing fax on page 42.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax while the
memory is full it will be sent in real time.
• You can send a color fax that is Letter size
or a black & white fax that is Ledger size.
Sending a Fax
5
Fax Resolution
FAX
Standard
Auto
Letter
Glass ScanSize
Phone Book
Contrast
Fax Press Start