Brother MFC-5890CN - Manual (Page 75)

Receiving a Fax
59
6
Note
• PC Fax Receive is not supported in the
Mac OS
®
.
• Before you can set up PC Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User’s Guide on the CD-ROM.)
• In the event of a power failure, the
machine will store your faxes in the
memory for approximately 24 hours.
However, if you choose
Backup Print:On the machine will print
the fax, so you will have a copy if there is
a power failure before it is sent to the PC.
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
and Maintenance messages
on page 153.)
• Color faxes will be stored in the machine's
memory only if you have chosen
B&W(Max.LGR) as your Receiving
Priority setting. (See Setting the Receiving
Priority on page 54.)
Changing the destination PC
6
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
e
Press a or b to choose
PC Fax Receive.
Press OK.
f
Press a or b to choose Change.
Press OK.
g
Press a or b to choose <USB> or the PC
you want to receive.
Press OK.
h
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
i
Press Stop/Exit.