Subnet mask – Brother DCP-395CN User Manual

Page 107

Advertising
background image

Control panel setup

98

6

For Touchscreen models

6

a

Press MENU.

b

Press Network.

c

(For Wired) Press Wired LAN.
(For Wireless) Press WLAN.

d

Press TCP/IP.

e

Press IP Address.

f

Enter the IP address.
Press OK.

g

Press Stop/Exit.

Subnet Mask

6

This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.

a

Press Menu.

b

Press a or b to choose Network.

Press OK.

c

For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW and
MFC-495CW
(For Wired) Press a or b to choose Wired LAN.

(For Wireless) Press a or b to choose WLAN.

Press OK.

d

Press a or b to choose TCP/IP.

Press OK.

e

Press a or b to choose Subnet Mask.
Press OK.

f

Enter the Subnet Mask address.
Press OK.

Note

• For DCP-365CN, DCP-373CW, DCP-375CW and DCP-377CW, press a or b repeatedly to enter the first

three-digit number for the Subnet Mask. Press OK to enter the second three-digit number. Repeat this
step until you have entered the fourth three-digit number to complete the Subnet Mask. Press OK.

• For DCP-395CN, DCP-593CW, DCP-595CW and DCP-597CW, press a or b repeatedly to enter the first

three-digit number for the Subnet Mask. Press d to enter the second three-digit number. Repeat this step
until you have entered the fourth three-digit number to complete the Subnet Mask. Press OK.

g

Press Stop/Exit.

Advertising
This manual is related to the following products: