Wireless configuration for windows, Using the brother installer application, Using the brother installer application (for – Brother DCP-395CN User Manual
Page 57
48
4
4
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows
®
found on the CD-ROM we have provided with the machine.
• You can also setup your Brother machine using the machine’s control panel which we recommend. You
can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless
network (Not available for DCP-365CN, DCP-395CN and MFC-295CN) on page 19.
• You must know your wireless network settings before you proceed with this installation.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
Wireless configuration for Windows
®
using the Brother installer application
(For DCP-373CW, DCP-375CW,
DCP-377CW, DCP-593CW, DCP-595CW,
DCP-597CW, MFC-495CW and MFC-795CW)
4