Brother MFC-640CW - Manual (Page 135)

ControlCenter2
129
Software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of the
SCAN buttons.
CUSTOM SCAN
10
You can configure the button name and settings for each of these buttons to meet your specific needs by
clicking a button while holding down the Ctrl key and following the configuration menus.
COPY / PC-FAX
10
COPY - Allows you to use your Macintosh ® and any printer driver for enhanced copy operations. You can
scan a page on the machine and print the copies using any of the features of the machine’s printer driver, or
you can direct the copy output to any standard printer driver installed on your Macintosh
®
including network
printers.
PC-FAX - Allows you to scan a page or document and automatically send the image as a fax from the
Macintosh
®
. (Not available for DCP models.)
You can configure your preferred settings on up to four buttons.
DEVICE SETTINGS
10
You can configure the machine settings or check ink levels.
„ Remote Setup
Allows you to open the Remote Setup Program. (Remote Setup (For Mac OS
®
X 10.2.4 or greater) (Not
available for DCP models) on page 149.)
„ Quick-Dial
Allows you to open the Set Quick-Dial window of the Remote Setup. (Remote Setup (For Mac OS
®
X
10.2.4 or greater) (Not available for DCP models) on page 149.)
„ Ink Level
Allows you to open the Brother Status Monitor, which displays the ink level for each cartridge. (Remote
Setup (For Mac OS
®
X 10.2.4 or greater) (Not available for DCP models) on page 149.)