Brother MFC-8640D - Manual (Page 160)

USING YOUR MACHINE WITH A MACINTOSH ® 7 - 45
Before finishing the Copy button configuration, you must set the
Printer. Then select your print settings from the Presets pull-down
list, then click OK to close the window. By clicking the configured
copy button, the print dialog window will open.
■ You must configure each of the copy buttons before they can
be used.
■ By using the Copy button, you can also send a fax using the
printer driver. (See Sending a fax from your Macintosh
®
application (For MFC-8440, MFC-8640D, MFC-8840D and
MFC-8840DN only) on page 7-14.)