Brother MFC-8640D - Manual (Page 50)

HOW TO SCAN USING WINDOWS ® 3 - 3
Scanning a document into the PC
There are two ways in which you can scan a whole page. You can
either use the ADF (automatic document feeder) or the Flatbed
scanner glass.
If you would like to scan and then crop a portion of the page after
pre-scanning the document, you will need to use the scanner glass
(Flatbed). (See PreScanning to crop a portion you want to scan on
page 3-11.)
Scanning a document using the ADF
1
Place the original face up in the ADF (automatic document
feeder).
2
Select the Document Feeder from the Paper source
drop-down list box (A).
3
Select the picture type (B).
4
Select the Paper size from the drop-down list box (D).
5
If you require advanced settings, click Adjust the quality of the
scanned picture (C). You can select Brightness, Contrast,
Resolution and Picture Type from the Advanced Properties.
Click the OK button after you choose your settings.
A
B
C
D