Brother MFC-8640D - Manual (Page 170)

NETWORK SCANNING (WINDOWS ® 98/98SE/ME/2000 PROFESSIONAL AND XP ONLY) 8 - 7
Scan to Image
When you select Scan to Image your original will be scanned and
sent directly to the PC you designated on your network.
ControlCenter2.0 will activate the default graphics application on the
designated PC. You can change the
Scan configuration.
(See Scan to Image: on page 4-12.)
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press Scan .
3
Press or to select
Scan to Image .
Press Set .
4
Press or to select a
destination you want to send to.
Press Set .
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Set .
The machine will start the scanning process.
▲
Scan to E-mail
Scan to Image
Scan to OCR
▼
Scan to File
Select
▲▼
& Set