Brother MFC 7840W - Manual (Page 160)

146
5.LAN
(MFC-7840W
only)
(continued)
1.Wired
(continued)
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the Ethernet
link mode. See
Network
User’s
Guide
on the
CD-ROM.
3.Set to
Default 1.Reset
2.Exit
— Restore the wired
network setting to
factory default.
4.Wired
Enable — On*
Off
Enable or Disable the
Wired LAN manually.
2.WLAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway
address.
5.Node Name BRW
XXXXXXXXXXXX Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP address
of the primary or
secondary WINS server.
The factory settings are shown in Bold with an asterisk.
Main
Menu Submenu Menu Selections Options Descriptions Page