Brother MFC-J825DW - Manual (Page 240)

Printing on a Disc (MFC-J825DW/J835DW only)
231
14
k
Enter the number of copies you want either by pressing the number box directly, or pressing + or -, and
then do one of the following:
 If you want to change the print settings, press PrintSetting and go to l.
 If you do not want to change any settings, go to n.
l
Choose your printable disc type.
 If you chose Printable Disc, go to m.
 If you chose Glossy Disc, go to n.
m
Press Normal or Slow Drying.
Use Slow Drying if the print is smudged.
n
Press Print Disc.
o
Load a printable disc on the tray. (See How to load a printable disc uu page 226.)
Press OK.
p Press Color Start.
The machine starts printing on the disc.
Do one of the following:
 If you are printing only one disc, the finished message appears on the LCD of the machine. Press OK.
 If you are printing more than one disc, replace the disc with a new one and press OK.
Press Color Start.
The machine starts printing on the next disc.
(Repeat this step for each additional disc.)
Adjust the print position
14
If the printed image runs off the edges of the disc, you may need to adjust the print position.
a
Press Menu.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Disc Print Alignment.
e
Press Disc Print Alignment.
f
Adjust the print position by pressing a, b, d or c.
g
Press OK.