Brother DS-720D - Manual (Page 33)

Scanning Applications and Settings
28
5
Paper settings
Click the Paper tab to define values related to image output.
(1) Page Size Page Size allows you to capture a portion of the scanned document.
Choose your paper size from the Page Size pop-up list, define the X Offset and
Y Offset values or specify Width and Length to define your scanned area. Click
Preview Window (4) to preview image placement as you change the values.
• X Offset - the distance from the left edge of the document to the left edge of the
scanned area.
• Y Offset - the distance from the top edge of the document to the top edge of the
scanned area.
• Width - the width of the scanned area.
• Length - the length of the scanned area.
(2) Unit Unit allows you to define your preferred measurement system. Select Inches, Mil-
limeters, or Pixels from the pop-up list.
(3) Default Reset values in this and all other Properties tabs to the original factory settings.
(4) Preview Window Click to preview your image before final scan. This preview image lets you define
your scan area.
When you click Preview, scanning for the preview starts and the scanned image
will appear in the Preview Window. Note that the scanned image is only for the
preview and will not be saved.
(1)
(3)
(2)
(4)