Brother MFC 9840CDW - Manual (Page 55)

Wireless configuration for Windows ®
45
4
Configuration with an access point that supports
SecureEasySetup™
4
For Windows
®
2000/XP or Windows Vista™
4
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
a Turn on the machine by plugging in the power cord.
b Press Menu, 7, 2, 6. Using a or b, choose On and press OK.
72.WLAN
6.WLAN Enable
a On
b Off
Select ab or OK
c Turn on your computer.
Note
Before configuration, if you are using Personal Firewall software, disable it. Once you are sure that you
can print after the installation, restart your Personal Firewall software.
d Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
e The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.
(For US) (For UK)