Brother MFC-845CW - Manual (Page 22)

Installing the Driver & Software
20
STEP2
W
in
dow
s
®
US
B
Windows
®
13
Lift the scanner cover to release the lock ( ).
Gently push the scanner cover support
down ( ) and close the scanner cover ( ).
14
Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
15
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
16
Click Finish to restart your computer.
(After restarting the computer, for Windows
®
2000 Professional/XP/XP Professional x64
Edition, you must be logged on with
Administrator rights.)
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs (Programs)/Brother/
MFC-XXXX.
The MFL-Pro Suite has been installed and
the installation is now complete.
Note
• MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
ScanSoft
® PaperPort ® SE with OCR and
True Type
®
fonts.
PaperPort ® SE with OCR is a document
management application for scanning and viewing
documents.
• Windows ® XP Professional x 64 Edition does not
support the Brother ControlCenter3 Modern user
interface (see the Software User’s Guide located
on the CD-ROM for details).