Brother MFC-J835DW - Manual (Page 15)

Introduction
12
1
Registering and deleting accounts on the machine
1
Enter the account information and configure the machine so that it can access EVERNOTE
®
.
Configure e-mail settings on the machine
1
Your machine communicates with EVERNOTE
®
using E-mail. This means that before you can use the
EVERNOTE
®
feature, you will need to enter some information to let your machine send E-mail. You can
usually get this information from your Internet Service Provider (ISP).
NOTE
The machine does not support e-mail servers that use SSL or TLS, therefore you cannot specify an e-mail
server that uses SSL or TLS.
a
Before you begin to register an account please confirm the correct time and date are set on the control
panel of the machine. Please see the Quick Setup Guide included with you machine for instructions on
setting the correct time and date.
b Press Web on your machine’s LCD.
c Information regarding Internet connection is displayed on the machine’s LCD.
Please read the information and press OK.
d You will be asked if you want to display this information again in the future.
Press Yes or No.
NOTE
If there are announcements about new features, and so on, the latest information will be displayed. Read
the information and press OK.
e Choose EVERNOTE
®
.
f
If information regarding your specified EVERNOTE
®
e-mail address is displayed, press OK.
g Press Register/Delete Account.
If you are registering an account for the first time, or if there are no accounts currently registered, go to
step h.
If you have already registered an account, press Edit E-mail Settings and go to step i.
h A message is displayed prompting you to configure the e-mail server settings.
Press OK.
i Choose the setting that you want to change and configure the setting.
In Mail Address, enter the E-mail address for the account you want your machine to use.
Press OK.
j
In SMTP Server, enter the SMTP server address (for example "mailhost.brothermail.net" or
"192.000.000.001").
Press OK.