Brother MFC-3820CN - Manual (Page 63)

4 - 5 GETTING STARTED
General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax,
Copy and Scan. You can change the number of seconds or minutes
the MFC takes after the last Copy or Scan operation before it returns
to Fax mode. If you select
Off , the MFC stays in the mode you used
last.
1
Press Menu/Set , 1 , 1 .
2
Press or to select
0 Sec , 30 Secs , 1 Min , 2 Mins , 5 Mins or Off .
3
Press Menu/Set .
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
1
Press Menu/Set , 1 , 2 .
2
Press or to select Plain ,
Inkjet , Glossy or Transprncy .
Press Menu/Set .
3
If you selected Glossy , press or to select
Glossy:4-Color or Glossy:3-Color .
Press Menu/Set .
4
Press Stop/Exit .
The print quality of black ink varies depending on the kind of
glossy paper you are using. Black ink is used when you select
Glossy:4-Color . If the glossy paper you are using repels the
black ink, select Glossy:3-Color , which simulates black ink
by combining the three ink colors.
1.Mode Timer
2.Paper Type