Brother MFC-J835DW - Manual (Page 60)

Chapter 7
46
Storing numbers
7
You can set up your machine to do the
following types of easy dialing: Speed Dial
and Groups for broadcasting faxes. When
you dial a Quick Dial number, the LCD shows
the number.
Note
If you lose electrical power, the Quick Dial
numbers that are in the memory will not be
lost.
Storing a pause
7
When you are storing Speed Dial numbers,
you can insert one or more 3.5-second
pauses by pressing the Pause button on the
Touchscreen.
Storing Speed Dial numbers
7
You can store up to 100 2-digit Speed Dial
locations with a name, and each name can
have two numbers. When you dial you will
only have to press a few buttons on the
Touchscreen (for example: press
, the
number you want to call and Send a fax).
a
Press .
b
Press More.
c
Press Set Speed Dial.
d
Do one of the following:
 Enter the name (up to 16 characters)
by pressing the buttons on the
Touchscreen.
Press OK.
(To help you enter letters, see
Entering Text uu page 122.)
 To store the number without a name,
press OK.
e
Enter the first fax or telephone number
(Fax/Tel1:) by pressing the buttons
on the Touchscreen (up to 20 digits).
Press OK.
f
Do one of the following:
 Enter the second fax or telephone
number (Fax/Tel2:) by pressing
the buttons on the Touchscreen (up
to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
g
To choose where the number will be
stored, do one of the following:
 To accept the displayed next
available Speed Dial location, press
OK.
 To enter a different Speed Dial
location, press
and a 2-digit
number using the buttons on the
Touchscreen.
Press OK.
Note
If the 2-digit Speed Dial location you
choose is already taken, the OK button on
the LCD will not work. Choose a different
location.
h
When the LCD displays your settings,
press OK to confirm.
i
Do one of the following:
 To store another Speed Dial
number, repeat steps b to h.
 To finish storing numbers, press
Stop/Exit.