Brother MFC-465CN - Manual (Page 25)

Control panel setup
18
3
b Press a or b to select LAN.
Press OK.
c Press a or b to select TCP/IP.
Press OK.
d Press a or b to select IP Address.
Press OK.
e
Press a or b to select Change.
Press OK.
(For MFC-680CN) Skip to step f.
f Enter the IP address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the IP address. Press
c
to enter the second three-digit number. Repeat this step until you have entered the fourth three-digit
number to complete the IP address. Press OK.
g
Press Stop/Exit.
Subnet Mask
3
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select TCP/IP.
Press OK.
d Press a or b to select Subnet Mask.
Press OK.
e
Press a or b to select Change.
Press OK.
(For MFC-680CN) Skip to step f.
f Enter the Subnet Mask address.
Press OK.