Function table and default factory settings – Brother MFC-465CN User Manual
Page 57
Appendix B
50
B
Function table and default factory settings
B
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
2
For DCP560CN, the default Node Name is BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address).
Level1
Level2
Level3
Options
LAN
TCP/IP
BOOT Method
Auto/Static/RARP/BOOTP/DHCP
IP Address
[000-255].[000-255].[000-255].[000-255] *
Subnet Mask
[000-255].[000-255].[000-255].[000-255]*
Gateway
[000-255].[000-255].[000-255].[000-255]
Node Name
BRNxxxxxxxxxxxxx= (your machine’s Ethernet address)
(up to 15 characters)
WINS Config
Auto/Static
WINS Server
(Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
DNS Server
(Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
APIPA
On/Off
Setup Misc.
Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
Factory
Reset