Brother MFC-465CN - Manual (Page 27)

Control panel setup
20
3
b Press a or b to select LAN.
Press OK.
c Press a or b to select TCP/IP.
Press OK.
d Press a or b to select Node Name.
Press OK.
e
Press a or b to select Change.
Press OK.
(For MFC-680CN) Skip to step f.
f Enter the Node Name.
Press OK.
Note
DCP models cannot change the Node Name from the control panel menu.
g Press Stop/Exit.
WINS Config
3
This selection controls how the machine obtains the IP address of the WINS server.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select TCP/IP.
Press OK.
d Press a or b to select WINS Config.
Press OK.
e Press a or b to select Auto or Static.
Press OK.
(For MFC-680CN) Press d or c to select Auto or Static.
Press OK.
f Press Stop/Exit.
Auto
3
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto or DHCP for this feature to work.