Brother MFC-3420C - Manual (Page 139)

11 - 12 WALK-UP PHOTOCAPTURE CENTER ™ (MFC-3820CN ONLY)
■
Sharpness
This setting enhances the detail of an image. It is similar to
adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then
adjust the sharpness.
■
Color Density
This setting adjusts the total amount of color in the image. You
can increase or decrease the amount of color in an image to
improve a washed out or weak picture.
Cropping
If your photo is too long or wide to fit the available space on your
selected layout, part of the image will be automatically cropped.
The default setting is On . If you want to print whole image, turn this
setting to Off .
1
Press Menu/Set , 4 , 6 .
2
Press or to select Off (or On ).
Press Menu/Set .
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the MFC will beep to
get your attention.
Media Error — This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File — This message will appear if you try to access the media
card in the drive (slot) does not contain a .JPG file.
Out Of Memory — This message will appear if you are working with
images that are too large for the MFC’s memory.
Unsupported Card — This message will appear if you insert a
media card that is not supported.