Brother MFC-3420C - Manual (Page 64)

GETTING STARTED 4 - 6
Setting the Paper Size (MFC-3420C only)
You can use two sizes of paper for printing your faxes and copies:
letter and legal. When you change the type of paper you load in the
MFC, you will need to change the setting for Paper Size at the same
time so your MFC can fit an incoming fax on the page.
1
Press Menu/Set , 1 , 3 .
2
Press or to select
Letter or Legal .
Press Menu/Set .
3
Press Stop/Exit .
Setting the Paper Size (MFC-3820CN only)
You can use two sizes of paper for printing your faxes and copies:
letter and legal. When you change the type of paper you load in the
MFC, you will need to change the setting for Paper Size at the same
time so your MFC can fit an incoming fax on the page.
1
Press Menu/Set , 1 , 3 .
2
Press or to select
Letter or Legal .
Press Menu/Set .
3
Press Stop/Exit .
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
For Copy Options, you can also change the paper size to photo
card size (4"
×
6") for the next copy only.
(See Paper Size on page 10-8.)
For PhotoCapture Center and Copy Options, you can also
change the paper size to photo card size (4"
×
6") for the next
copy or printout only.
(See Paper Size on page 10-8 and Paper & Size on page 11-9.)
3.Paper Size
3.Paper Size