Brother MFC-3420C - Manual (Page 88)

SETUP SEND 6 - 8
Manual and automatic fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing
Redial/Pause and Black Start or
Color Start .
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial one time after five minutes.
Color fax transmission
Your MFC can send a color fax to machines that support this feature.
However, color faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
If it is not illuminated in green, press ( Fax ).
2
Load your original. (See Load originals on page 2-1.)
3
Enter the fax number using the dial pad, Speed-Dial or Search.
4
Press Color Start .
When you send a color fax, the MFC will send it in real time
(even if
Real Time TX is set to Off ).
You can not send multiple pages from the scanner glass.